Posts Tagged ‘woodworking’

Stripping and Re-Finishing Wooden Furniture [Part 2 of 3]

CLICK THIS LINK bit.ly Ever wanted to create woodworking projects easily and quickly? I just came across a site with over 16000 downloadable woodworking plans at: Ted’s Wood Working CLICK HERE bit.ly VIDEO DESCRIPTION This is the second part of a three part series explaining how to refinish old antique furniture. CLICK THIS LINK bit.ly

Related Info

    Stripping and Re-Finishing Wooden Furniture [Part 2 of 3]

    CLICK THIS LINK bit.ly Ever wanted to create woodworking projects easily and quickly? I just came across a site with over 16000 downloadable woodworking plans at: Ted’s Wood Working CLICK HERE bit.ly VIDEO DESCRIPTION This is the second part of a three part series explaining how to refinish old antique furniture. CLICK THIS LINK bit.ly

    Related Info

      How to Refinish Hardwood Floors

      Instructions on How to Refinish Hardwood Floors!

      Related Info

      ITALPRESSE PMDE-1 in real production (Automatic cold pressing line for 2 plies Engineered Flooring)

      This video features an Italpresse automatic cold pressing line for the lamination of 2 plies engineered flooring (IN REAL PRODUCTION). Plywood boards (in this video are particleboard only for demonstration) are fed through a glue spreader that applies glue only on the top side of the panel. Once the plywood panel reaches and stop on top of the disc conveyor, a handling unit will pick up the panel by means of grippers with thin panel holding device and will lay it down on a motorized belt mounted on top of a scissors lift. Subsequently a vacuum handling unit will pick up the solid wood lamellas and it will lay them down on top of the plywood panel. This unit is self aligning, therefore when the solid wood lamellas are placed over the plywood sheet, alignment is automatically assured. Glued plywood panel handling unit and solid wood lamellas handling unit run on the same runways granting precision of reciprocal positioning of the two units. This process will repeat till a stack of panels/lamellas is made. Once the stack is composed, all the material will be driven into the hydraulic press for the pressing cycle.

      Related Info

      Krylon Spray Stain Review

      Krylon recently released a line of exterior wood stains in spray form. A very convenient way to transfer color to your outdoor projects! I sprayed 6 different test boards (maple and white oak) just to see how well the stain applies. Watch the video to see the results and hear my opinion of the product. If you want more information, check out SaveOurSaturdays dot com.

      Related Info

      Water Based Stain

      A ten minute tutorial on using waterbased wood stain and urethane to achieve a flawless finish. Sanding, application and a unique approach to buffing are covered.

      Related Info

      How to Stain Wood : Why Do We Stain Wood?

      Staining is great way to match pieces of furniture. Learn why staining wood can create a wood project that looks better and lasts longer in this free woodworking and wood project series from an expert carpenter. Expert: Steve Anthony Contact: www.SteveAnthonyStudios.com Bio: Steve Anthony has been a professional photographer since 1989. Filmmaker: Steve Anthony

      Related Info

      How to Stain Wood : Cherry Stain on Maple Wood

      Chery stain on maple can look very much like cherry wood. Learn this and other helpful tips for staining wood in this free woodworking and wood project series from an expert carpenter. Expert: Steve Anthony Contact: www.SteveAnthonyStudios.com Bio: Steve Anthony has been a professional photographer since 1989. Filmmaker: Steve Anthony

      Related Info

      Using a spray bottle to apply wood stain

      My dad is using a cheap spray bottle to apply wood stain to the baby cradle we built. With all the nooks and cranny’s, it would be hard to get an even coat using just a rag. View the assembly photos at picasaweb.google.com

      Related Info

      Woodworking Information : How to Bend Wood to Make Furniture

      Bend wood to make furniture using a bent lamination technique that involves cutting wood into the desired shape, ripping wood strips, applying glue with a roller and clamping wood pieces into place. Find out how long to let bent wood pieces dry in this free video from an award-winning woodworker on basic carpentry. Expert: Kent Perdue Bio: Kent Perdue is a senior in the furniture-making program at VCU, and has received many scholarships and awards for his work. Perdue sells his work at various furniture stores in Richmond, Va. Filmmaker: nate thompson

      Related Info

      Powered by Yahoo! Answers